An Egg Timer

I just had a perfectly cooked boiled egg. That's not terribly unusual. The unusual part is that for once I have confidence that I can do it again whenever I want. All thanks to a brilliantly designed egg timer.




Sabrina found this when we were wandering through Crate and Barrel. I'm going to provide some info on exactly how it works, since the packaging leaves a little to be desired.

The timer is simply a clear plastic egg with a layer of temperature sensitive material in the middle. It is placed in the boiling water with the eggs, and the red portion slowly changes to black as the eggs cook.

This is what it looks like as time progresses:



























Note the difference in how the scale looks between the first picture and these two. When the egg is under water, the scale is easier to read, partially due to the curvature of the top surface.

I store it in the fridge with my eggs. I figure it is important that they start off at the same temperature. Then I drop it into the boiling water at the same time as the eggs.

The brilliance of this design is that it doesn't matter what temperature the water is. (Like if you add a bunch of eggs to a small amount of water, if you cook at a different altitude, if you sometimes salt the water, or even if you turn off the heat at some point.) The time fluctuates, but the timer compensates and reads correctly based on heat transfer. Not bad for $5.

The one downside is that there is no audible alert that your eggs have reached the desired level of hardness. You have to check on it periodically. For me, this is not a big deal. I have started cooking eggs while doing other things in the kitchen. (Like washing dishes, cleaning, cooking, etc.) This keeps me in the same room, so it is easy to glance into the pot every few minutes  (Or to fish out the timer with a spoon if it is too difficult to see through the bubbling water and steam.)

Craftsman Cap Wrench

I love well-made tools. Objects that serve their purpose in a steadfast, understated, and seemingly effortless manner.  The Craftsman Cap Wrench Bottle Opener is one such tool. The name is slightly deceptive since it operates with a prying motion, and not the twisting motion you would tend to expect from a wrench, but I am willing to overlook that small marketing flaw. 

Like all bottle openers, it is a very simple tool. Its entire purpose is to apply a small bit of leverage to pop the caps off of bottles of beer.

Upon first glance, it doesn't look all that special. There is the obvious attempt to appeal to fans of their hand tools. It appears to be a good excuse to get you to spend $15 on a bottle opener, most likely as a gift. The beauty of the design is not obvious until you actually use it.

First, a short description. There is a raised dome built into the center of the openingrench. This pushes against the center of the bottle cap and acts as the fulcrum. There are two metal ears on that catch the edge of the cap. These are at opposite ends:  one by the handle and one on the far end. You can use either one, resulting in a prying up or prying down motion respectively. In the picture below you can see the unused ear by the handle, with the edge of the cap caught by the ear on the other side. This would be for the prying down motion.

The dome has the secondary purpose of preventing the cap from falling down into the opening where the combination of the two ears could make it difficult to remove. That pitfall is cleverly avoided.

The really beautiful design feature is how the two ears interact. When you catch the edge of the cap with one ear, the other pushes against the opposite side of the cap, preventing the wrench from slipping off. It takes almost no effort to keep the wrench on the cap. It almost feels like the weight of the wrench is enough by itself to open the bottle. It is incredibly easy to use. 

Sure, you probably don't really need such a massive chunk of forged steel to open a beer bottle, but if you're anything like me you will want your own as soon as you use one.